Directions

How to find Fern Plastic Products Ltd.

1) If approaching Wolverhampton via A38 from Derby or A5 from Nuneaton.

2) Follow A5 signposted to Brownhills, Cannock and then Telford.

3) As you approach a large oundabout with McDonalds, Halfords and Do-It-All on
your left take the exit off the roundabout which is signposted A460 Wolverhampton,
M54 Telford.

4) Carry straight on until you reach the roundabout above M6 motorway, take the 3rd
exit off the roundabout which is signposted A460 Wolverhampton, M54 Telford.

5) Carry straight on through the village of Featherstone until you reach the roundabout under the M54 motorway. Get onto the M54 motorway signposted Telford, which is the 3rd exit off the roundabout.

6) Once on M54 motorway stay in left hand lane and leave the motorway at next exit which is Junction 2 this takes you down to A449 Wolverhampton to Stafford Road.

7) Turn left heading into Wolverhampton along the dual carriageway.

8) Straight on at two sets of traffic lights.

9) Straight on at two roundabouts.

10) At next set of traffic lights turn right into Oxley Moor Road.

11) Follow road around straight on at 3 mini roundabouts, straight on through the traffic lights which takes you under two railway bridges close together.

12) After passing under second railway bridge there is a turning in the right called
Green Lane, turn into Green Lane.

13) Follow Green Lane around, 3rd turning right is Macrome Road.

14) Part way down Macrome Road is a small industrial area with a sign on the right indicating Fern Plastic Products Limited - you actually approach the rear of the factory first - to the right of the factory are yellow bollards and concrete driveway - follow this drive to visitors car park and office reception.